Husk mig
▼ Indhold

Energi fra fugt i luften, Free energy?

Energi fra fugt i luften, Free energy?06-09-2023 16:34
Nå det virker jo nok ikke evigt, selv om det er testet i en måned.

Imagine being able to generate electricity by harnessing moisture in the air around you with just everyday items like sea salt and a piece of fabric, or even powering everyday electronics with a non-toxic battery that is as thin as paper.

Researchers developed the new moisture-driven electricity generation (MEG) device made of a thin layer of fabric—about 0.3 millimeters (about 0.0118 inches) in thickness—sea salt, carbon ink, and a special water-absorbing gel.

The concept of MEG devices is built upon the ability of different materials to generate electricity from the interaction with moisture in the air. This area has been receiving growing interest due to its potential for a wide range of real-world applications, including self-powered devices such as wearable electronics like health monitors, electronic skin sensors, and information storage devices.

Key challenges of current MEG technologies include water saturation of the device when exposed to ambient humidity and unsatisfactory electrical performance. Thus, the electricity generated by conventional MEG devices is insufficient to power electrical devices and is also not sustainable.

To overcome these challenges, a research team led by Tan Swee Ching, assistant professor from the materials science and engineering department at the National University of Singapore's College of Design and Engineering (CDE), devised a new MEG device containing two regions of different properties to perpetually maintain a difference in water content across the regions to generate electricity and allow for electrical output for hundreds of hours.

A paper on the work appears in the journal Advanced Materials.

The new moisture-driven electricity generation device capitalizes on the difference in moisture content of the wet and dry regions of the carbon-coated fabric to create an electric current. Sea salt is used as a moisture absorbent for the wet region.

The researchers' MEG device consists of a thin layer of fabric which was coated with carbon nanoparticles. In their study, the team used a commercially available fabric made of wood pulp and polyester.

One region of the fabric is coated with a hygroscopic ionic hydrogel, and this region is known as the wet region. Made using sea salt, the special water-absorbing gel can absorb more than six times its original weight, and it is used to harvest moisture from the air.

"Sea salt was chosen as the water-absorbing compound due to its non-toxic properties and its potential to provide a sustainable option for desalination plants to dispose of the generated sea salt and brine," says Tan.

The other end of the fabric is the dry region which does not contain a hygroscopic ionic hydrogel layer. This is to ensure that this region is kept dry and water is confined to the wet region.

Once the MEG device is assembled, electricity is generated when the ions of sea salt are separated as water is absorbed in the wet region. Free ions with a positive charge (cations) are absorbed by the carbon nanoparticles which are negatively charged. This causes changes to the surface of the fabric, generating an electric field across it. These changes to the surface also give the fabric the ability to store electricity for use later.

Using a unique design of wet-dry regions, the researchers were able to maintain high water content in the wet region and low water content in the dry region. This will sustain electrical output even when the wet region is saturated with water. After being left in an open humid environment for 30 days, water was still maintained in the wet region demonstrating the effectiveness of the device in sustaining electrical output.

"With this unique asymmetric structure, the electric performance of our MEG device is significantly improved in comparison with prior MEG technologies, thus making it possible to power many common electronic devices, such as health monitors and wearable electronics," explains Tan.

The team's MEG device also demonstrated high flexibility and was able to withstand stress from twisting, rolling, and bending. Interestingly, to show its outstanding flexibility, the researchers folded the fabric into an origami crane which did not affect the overall electrical performance of the device.

The MEG device has immediate applications due to its ease of scalability and commercially available raw materials. One of the most immediate applications is for use as a portable power source for mobile powering electronics directly by ambient humidity.

"After water absorption, one piece of power-generating fabric that is 1.5 by 2 centimeters in size can provide up to 0.7 volts (V) of electricity for over 150 hours under a constant environment," says research team member Zhang Yaoxin.

The researchers have also successfully demonstrated the scalability of the new device in generating electricity for different applications. The team connected three pieces of the power-generating fabric together and placed them into a 3D printed case that was the size of a standard AA battery. The voltage of the assembled device was tested to reach as high as 1.96V—higher than a commercial AA battery of about 1.5V—which is enough to power small electronic devices such as an alarm clock.

The scalability of the invention, the convenience of obtaining commercially available raw materials as well as the low fabrication cost of about 0.15 Singapore dollars (0.11 USD) per meter square make the MEG device suitable for mass production.

"Our device shows excellent scalability at a low fabrication cost. Compared to other MEG structures and devices, our invention is simpler and easier for scaling-up integrations and connections. We believe it holds vast promise for commercialization," says Tan.

The researchers have filed a patent for the technology and are planning to explore potential commercialization strategies for real-world applications.

Source: National University of Singapore
06-09-2023 17:00
Euro postede denne seneste "gratis energi" fidus:
Forestil dig at være i stand til at generere elektricitet ved at udnytte fugten i luften omkring dig med bare hverdagsting som havsalt og et stykke stof, eller endda forsyne hverdagens elektronik med et papirtyndt, ikke-giftigt batteri.

Du nægter simpelthen at lære termodynamik. Du tror, ​​at din tro på klimaændringer gør dig til et videnskabeligt geni, der kan erklære, at fysikovertrædelser er lovende teknologi.

Du ville have stor gavn af at deltage i tankeeksperimenter, der involverer Maxwells dæmon.

You simply refuse to learn thermodynamics. You think your belief in climate change makes you a scientific genius who can declare that physics violations are promising technology.

You would benefit greatly from engaging in thought experiments involving Maxwell's demon.


Kun tåber fortsætter med at tro på menneskeskabte klimaændringer/global opvarmning.

Only fools continue to believe in man-made climate change/global warming.
Deltag aktivt i debatten Energi fra fugt i luften, Free energy?:

Husk mig

Lignende indhold
DebatterSvarSeneste indlæg
Pajero SUV uden diesel eller batteri, Free energi?805-07-2024 08:32
GreenGyro free energy til salg227-04-2024 11:59
Ny generator laver strøm af fugt.1718-02-2024 14:36
Free energy - Liberty engine 2.03626-06-2023 12:35
E-cat free energy generator gør klar til 12timers præsentation.017-06-2023 15:33
For dyrt at suge CO2 ud af luften13-05-2011 06:48
Kan man suge CO2 direkte ud af luften?02-03-2011 05:33
Så meget CO2 sparker fodbold-vm op i luften11-06-2010 07:45
Dybhavsvand skal afkøle luften03-05-2010 11:12
Soldrevent propelfly i luften08-04-2010 10:02
▲ Til toppen
Hvordan vil Coronakrisen påvirke klimadebatten?

Mindre opmærksomhed om klima

Ingen større påvirkning

Øget opmærksomhed om klima

Andet/Ved ikke

Tak for støtten til driften af
Copyright © 2007-2020 | Kontakt | Privatlivspolitik